Cradlepoint IBR650 - Basic Mode Vs. Advanced Mode

CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 22
4.4 Basic Mode vs. Advanced Mode
For less complex uses, the IBR650 can be controlled within Basic Mode. Clicking on the Basic Mode button switches the
complete Web interface to Advanced Mode. Advanced Mode provides several additional features.
The following chart shows the complete list of features found in Basic Mode and found exclusively in Advanced Mode:
Getting Started
Status
Network Settings
Internet
System Settings
Basic Mode
First Time Setup
Client List
Dashboard
GPS
Internet
Connections
Statistics
System Logs
Content Filtering
Local Networks
Connection
Manager
Ethernet Settings
Modem Settings
Administration
GPIO Connector
System Control
System Software
Advanced
Mode
(also
includes all
options in
Basic Mode)
GRE Tunnels
VPN Tunnels
DHCP Server
DNS
Firewall
Routing
WiPipe QoS
Data Usage
GRE Tunnels
Load Balance
VPN Tunnels
Device Alerts
Managed Services
Since Advanced Mode includes all features found in both modes, ALL REMAINING INSTRUCTIONS IN THIS
MANUAL WILL ASSUME YOU ARE IN ADVANCED MODE.
If an expected feature is missing from the user interface, be sure to check that you are using Advanced Mode.