CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 71
7.2.1 Data Usage Rules
The Date Usage Rule display shows basic
information for each rule you have created
(including rules created with a template).
The following information is displayed:
Rule Name
Enabled: True/False
Date for Rule Reset
Cycle Type: Daily, Weekly, or
Monthly
Cap: Amount in MB.
Current Usage: Shown as an amount in MB, as a percentage of the cap, and in a bar graph.
Click Add to configure a new Data Usage Rule.
Usage Rule Configuration – page 1
Rule Name: Give your rule a name for later recognition.
WAN Selection: Select from the dropdown list of currently
attached WAN devices.
Assigned Usage in MB: Enter a cap amount in megabytes. 1024
megabytes equals 1 gigabyte.
Rule Enabled: (Default: Enabled.) Click to disable.
Click Next to continue to page 2.
To Next Page
Loading...
