CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 12
3.2.2 Accessing the Administration Pages
For most users, the MBR1200B Router can be used immediately without any special configuration changes. If you would
like to change your network name or password or configure any of the advanced features of the MBR1200B, you will need
to log in to the administration pages:
Access your router‘s Administrator
Login screen by opening a web
browser window and typing ―cp/‖ (your
router‘s default hostname) or the IP
address ―192.168.0.1‖ into the
address bar.
Enter your Default Password. This
password can be found on the bottom
of the MBR1200B. Then click the
LOGIN button.
When you log in for the first time, you
will be automatically directed to the
First Time Setup Wizard. Follow the
instructions given with the Wizard or
see Getting Started – First Time
Setup for more information about
using the First Time Setup Wizard.
To Next Page
Loading...
