Cradlepoint MBR1200B - WiFi; Local Networks

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 70
6.7 WiFi / Local Networks
This section is used to configure the settings for wireless networks created by your router. Note that changes made in this
section may also need to be duplicated on wireless devices that you want to connect to your wireless network.
For example, if you change a LAN‘s IP address, devices within that network will lose connection. They will have to reconnect to the network.
The user can set up multiple networks, each with its own unique configuration and its own selection of interfaces. Each
local network can be attached to WiFi and/or Ethernet.
6.7.1 Local IP Networks
Local IP Networks displays the following
information for each network:
 Network Name
 IP address/Netmask
 DHCP Server (Enabled/Disabled)
 Routing Mode (NAT, Standard,
Disabled)
 Access Control (Admin Access, UPnP Gateway, LAN Isolation)
 Attached Interfaces (Ethernet ports, WiFi)
Click Add to configure a new network, or select an existing network and click Edit to view configuration options.