Cradlepoint MBR1200B - Configuration; C Onfiguration P Ages

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.4.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 26
4.4 Configuration Pages
The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal
the following dropdown menus.
Getting Started
Status
Network Settings
Internet
System Settings
First Time Setup
WiFi Protected Setup
Client List
Dashboard
GPS
GRE Tunnels
Internet Connections
Statistics
System Logs
VPN Tunnels
Content Filtering
DHCP Server
DNS
Firewall
MAC Filter / Logging
Routing
WiFi / Local Networks
Connection Manager
Data Usage
GRE Tunnels
VPN Tunnels
WiFi as WAN / Bridge
Administration
Device Alerts
Managed Services
System Control
System Software
Status – Displays various types of information about your router such as a list of clients that are attached to your
networks (Client List), the details of each Internet source your router is using (Internet Connections), and a map of
your router‘s location (GPS). Very few changes can be made from this tab because the primary purpose is to display
information.
Network Settings – Provides configuration options for the networks, or LAN, created by your router. For example, you
can enable a guest WiFi network (WiFi / Local Networks), set up rules to filter websites (Content Filtering), or create
a traffic-shaping rule to set bandwidth priorities (WiPipe QoS).
Internet – Provides configuration options for the Internet sources, or WAN, used by the router. For example, you can set
up a rule to track how much data you are using per month on a modem (Data Usage), set WiFi to be an Internet
source (WiFi as WAN / Bridge), or set the failback order for your Internet sources (Connection Manager).
System Settings – Provides broad administrative controls. For example, you can enable remote management of the
router (Administration), or upgrade firmware (System Software).