Cradlepoint MBR1200B - Page 91

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 89
7.1.3 General Settings
 Enabled: Select/deselect to
enable/disable.
 Load Balance: Select to allow this device
to be available for the Load Balance pool.
 LB default bandwidth: Defines the
default bandwidth for use in Load
Balance algorithms. (Range: 100
Kilobits/second to 49 Megabits/second.)
 QOS default bandwidth: Defines the
default bandwidth for use in QoS (quality
of service, or traffic shaping) algorithms.
 MTU: Maximum transmission unit. This is
the size of the largest protocol data unit
that the device can pass. (Range: 46 to
1500 Bytes.)
 Hostname (This only shows for certain
devices.)