Craftex CX118 - Features

5
MODEL CX118 - 10” BAND SAW WITH STAND
As part of the growing line of Craftex CX-Series machineries, we are proud to offer the CX118 a Wood
Band Saw with Stand. By following the instructions and procedures laid out in this user manual, you will
receive years of excellent service and satisfaction. The CX118 is a professional tool and like all power
tools, proper care and safety procedures should be adhered to.
Motor................................................................1/2HP, 110V, 3.4A, Single Phase
Switch ..............................................................ON/OFF Switch
Cutting Capacity/Throat ...................................10”
Cast Iron Table Size ........................................13-1/8” x 13-3/8” (Including Extension Table)
Table Tilt ..........................................................0° to 45°
Wheel Construction..........................................Precision Balanced Cast Aluminum
Blade Speed ....................................................2750 FPM
Blade Length ...................................................67-1/2"
Maximum Blade Width.....................................1/2"
Minimum Blade Width ......................................1/8”
Maximum Cutting Height..................................4-1/8"
Maximum Cutting Width...................................9-1/2"
Floor to Table Height .......................................41-1/2"
Dust Collection Port .........................................4”
Powder Coated Paint .......................................Yes
Overall Dimensions without Stand ...................27" Length x 18" Width x 33" Height
Overall Dimensions with Stand ........................30" Length x 19-1/2" Width x 59-1/2" Height
Approximate Weight.........................................37 Kg
Warranty ..........................................................3 Years
CX118 WOOD BAND SAW
FEATURES