Craftex CX501 - Features

5
MODEL CX501 – 6” x 48” BELT & 12” DISC SANDER
As part of the growing line of Craftex woodworking equipment, we are proud to offer CX501a
6” x 48” Belt and 12” Disc Sander. The Craftex name guarantees Craft Excellence. By
following the instructions and procedures laid out in this user manual, you will receive years of
excellent service and satisfaction. The CX501 is a professional tool and like all power tools,
proper care and safety procedures should be adhered to.
Belt sander operates horizontally & vertically and can be locked at any angle in between
Belt tracking adjustments are easily made with thumb screws
Two dust ports; 2” & 2-3/8” and two precision aluminum tables with miter gauge slots
Powdered coated paint
Motor ................................... ..........1 1/2-HP, 60-HZ, 1720-RPM
Disc Diameter...................... ..........12”
Disc Table Size.................... ..........17.5” x 10”
Disc Table Tilt...................... ..........0° to -45°
Belt Size .............................. ..........6” Width x 48” Length
Belt Speed........................... ..........2500 SFPM
Belt Sander Tilt.................... ..........0° to 90°
Belt Table Size .................... ..........10” x 8”
Belt Table Tilt....................... ..........0° to -45°
Approx Weight..................... ..........60.5 Kgs
Warranty.............................. ..........3 Years
CX501 – 6”x48” Belt &
12” Disc Sander
FEATURES