Craftex CX614 - Features

5
MODEL CX614 – 14" DRILL PRESS
As part of the growing line of Craftex metalworking equipment, we are proud to offer the
CX614, a 14" Drill Press. By following the instructions and procedures laid out in this user
manual, you will receive years of excellent service and satisfaction. The CX614 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ..............................................3/4 HP
Size ................................................14"
Chuck .............................................5/8"
Spindle ...........................................MT2
Spindle Travel.................................3-1/2"
Quill ................................................66mm
Table Size.......................................11-1/4" x 11-1/4"
Speeds ...........................................12
Height.............................................64"
Weight (Approx)..............................67 Kg
Carton Size.....................................20" x 10" x 56"
Warranty.........................................3 Years
CX614 – 14" Drill Press
FEATURES