8
SETUP
Before setting up your machine you should
read and understand the instructions given
in this manual.
The unpainted surfaces of this machine are
coated with a rust preventive waxy oil and
you will want to remove this before starting
assembly. Use a solvent cleaner that will
not damage painted surfaces.
UNPACKING
To ensure safe transportation this machine
is properly packaged and shipped
completely in a crate. When unpacking,
carefully inspect the crate and ensure that
nothing has been damaged during transit.
While doing inventory, if you can not find
any part, check if the part is already
installed on the machine. Some of the parts
come assembled with the machine for the
shipping purposes.
WARNING!
CX614 is a heavy machine, do not over-
exert yourself. Use a fork truck or get the
help of an assistant for safe moving.
To Next Page
Loading...
