Need help?Do you have a question about the Craftsman 113.221720 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inch |
| Voltage | 120V |
| No Load Speed | 3450 RPM |
| Max Cut Depth at 90° | 3 inches |
| Max Cut Depth at 45° | 2-1/4 inches |
| Amps | 15A |
Essential checks before operating or moving the saw for safe use.
Daily pre-operation checks and work area preparedness.
Personal protective measures, kickback prevention, and cut planning.
Procedures for safe cutting, handling issues, and securing the saw.
Guidance on safely connecting the saw to a power outlet, including grounding.
Steps for assembling and aligning the blade guard and spreader.
How to attach and align the rip fence for ripping operations.
How to use the power switch, including the key lock feature.
Steps for safely removing the existing sawblade.
Guide to correctly install a new sawblade, including collar use.
Comprehensive safety guidelines specific to general saw operations.
Cutting wood along its length and at an angle using the rip fence.
Common problems and their solutions for saw operation.
To Next Page