Craftsman 113.221740 User Manual

f
\
Save This Manual
For Future Reference
SEAfR8
ownel"s
manual
MODEL NO.
113=221740
Serial
Number.
Model and serial numbers may
be round at the rear of the
base
You should record botll model
and serial number in a safe
place for future use.
FO YOUR
;AFETY
READ ALL
INSTRUCTIONS
CAREFULLY
Pa_ NoSP5754
8 , Rt6/
10 iNCH BENCH TOP
TABLE SAW
®assembly
, operating
. repair parts
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
J
Printed in USoA,

Craftsman 113.221740 Specifications

General

Brand	Craftsman
Model	113.221740
Category	Saw
Language	English

Summary

Safety Instructions and Warnings

General Safety Guidelines

Essential safety signals, pre-operation setup, and installation precautions.

Pre-Operation Checks and Work Area Safety

Detailed checks for saw, blade, work area, and personal safety measures before operation.

Safe Workpiece Handling and Operation

Guidelines for safe workpiece manipulation, avoiding kickbacks, and proper saw operation.

Specific Cut Safety (Rip, Crosscut)

Safety protocols specific to rip cuts and crosscut operations.

Motor Specifications and Electrical Requirements

Power Supply and Motor Specs

Details on the saw's power supply, motor specifications, and voltage requirements.

Double Insulation and Polarized Plug

Overload Protection and Wire Size

Setup, Assembly, and Mounting

Unpacking and Checking Contents

Component Assembly and Adjustments

Sawblade Installation and Removal

Mounting the Table Saw Securely

Guidance on securely mounting the table saw to a workbench or legset for stability.

Getting to Know Your Table Saw and Basic Operations

Work Feed Devices and Jigs

Using the Miter Gauge for Cuts

Using the Rip Fence for Cuts

Maintaining Your Table Saw

General Maintenance Procedures

Routine maintenance, cleaning, lubrication, and pawl care for optimal performance.

Troubleshooting Common Issues