To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 25310 and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Engine Cycle | 4-Cycle |
| Engine Displacement | 140 cc |
| Cutting Height Positions | 6 |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Engine Type | Gasoline |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 in |
| Speed Settings | Variable speed |
| Wheel Size (Front) | 8 inches |
Emphasizes careful reading of instructions, operator responsibility, and proper training.
Details pre-operation checks, fuel handling, and area inspection for safety.
Outlines safe procedures during mowing, including slopes, traffic, and equipment handling.
Provides instructions for maintaining the equipment and storing it safely.
Step-by-step guide for mounting the steering wheel and its components.
Instructions for installing the operator's seat onto the tractor.
Guidance on connecting and installing the battery, including safety warnings.
Steps for attaching the mulcher plate for grass clippings management.
Identifies the location and function of various operator controls on the tractor.
Explains the operation of the ignition, throttle, and choke for starting and running the engine.
Details the function of the combined brake/clutch pedal and the gear shift lever.
Explains how to engage, disengage, lift, and lower the cutting unit.
Instructions on how to engage and disengage the parking brake for securing the tractor.
Explains the function and usage of the Reverse Operation System for mowing in reverse.
Provides advice on mowing techniques, grass conditions, and clearing obstacles.
Safety and procedural guidelines for refueling the tractor's fuel tank.
Instructions for checking engine oil and maintaining proper tire inflation.
Step-by-step procedure for starting the tractor's engine, including choke and throttle usage.
Explains critical safety systems that monitor operator presence and enable reverse operation.
Instructions on sharpening, replacing, and installing mower blades for optimal cutting.
Procedure to verify the brake system's effectiveness and identify potential issues.
Steps for removing the mower deck and its components.
Steps for reinstalling the mower deck and its components.
Procedure for replacing the drive belt that powers the cutting unit.
Guides on adjusting the cutting unit for levelness and proper cutting height.
Procedure for adjusting the gear shift lever to ensure neutral position and proper transaxle function.
Common problems and solutions when the engine fails to start or turn over.
Diagnosis and fixes for issues like uneven running, low power, or overheating.
Troubleshooting steps for battery charging and lighting system malfunctions.
Solutions for problems such as excessive vibration or uneven grass cutting.
