To Next PageTo Next Page
Need help?Do you have a question about the Craftsman Professional 119.224010 and is the answer not in the manual?
Read manual, learn applications, capabilities, and potential hazards.
Specific safety precautions for operating the bandsaw, including blade handling and material feed.
Lists the tools needed for assembling the bandsaw, such as screwdrivers and wrenches.
Instructions for unpacking the bandsaw and verifying all parts are present.
Step-by-step guide for assembling the main components of the bandsaw.
Procedure to align the bandsaw table accurately with the saw blade.
Adjusting the table's alignment relative to the saw blade from side to side.
Aligning the table with the saw blade from front to back for accurate cuts.
Instructions on how to tilt the table for bevel cuts, up to 45 degrees.
Adjusting the vertical and horizontal alignment of the rip fence for precise cuts.
Calibrating the rip fence scale for accurate measurement of cut width.
How to correctly tension the saw blade using the tension knob and indicator.
Procedure for replacing and correctly tracking a new saw blade.
Ensuring the saw blade runs centered on the bandsaw wheels for optimal performance.
Adjusting the upper blade guide to the desired cutting height for the workpiece.
Aligning upper and lower blade guides for blade support and longevity.
Instructions on how to change the blade speed for different materials.
Step-by-step guide for replacing the drive belt on the bandsaw.
General