Note! The machine has a safety feature which will
allow the heater tank to fill for a maximum of two
minutes. If after power-up the heater tank has not
filled within this time, the mains power supply should
be switched off and then on again to reset the heater
tank time-out.
Important! Should the machine fail to fill correctly or
leak, turn off the water and power to the machine
before investigating the fault.
7. All Models: Rotate soluble/fresh
brew ingredient canister outlets to
upright position. The bean canister
needs to have the outlet slide in the
closed position before removal.
Place the canister into the canister
filling station located on the door and fill canister with
the correct ingredient.
DO NOT place the canister on the floor or overfill with
ingredient.
Refit canister into machine ensuring that it is returned
to the correct position. Remember to open the
canister outlet slide once the canister is in position.
8. If fitted, check that the coin
mechanism operates correctly. Fill
the coin tubes. Ensure coin return
mechanism functions correctly.
To Next Page
Loading...
