Section 4 - Cleaning and Re-filling Procedures
The quality of drinks produced by your machine can only be maintained if it is cleaned regularly
following the schedule outlined. You will need to have the following available:
• Bactericidal Cleaner
• De-Staining Agent (as required)
• CoEx Cleaning Tablets (as required)
• Cleaning Cloths
• Paper Towels
• Small Brush
• Two Large Buckets
• Disposable Gloves (to be worn throughout these procedures)
4.1 Bactericidal Cleaner
This can either be a liquid or powder agent which should be dissolved in water in accordance
with the instructions on the product packaging. The solution should be used for cleaning
machine components and wiping surfaces during the cleaning operation.
4.2 De-Staining Agent
This is a liquid or powder agent which should be dissolved in water and diluted in accordance
with the manufacturer’s instructions. The solution can be used on heavily soiled or stained
components such as buckets and drip trays. Items or surfaces cleaned with this solution must be
rinsed in clean water to remove traces of the cleaning agent.
4.3 Liquid Destainer - Brewer Units
Crane Merchandising Systems recommends that a liquid de-staining product is used for cleaning
the brewer units fitted to fresh brew machines. The product must be used in accordance with
the manufacturer’s instructions, following all health and safety guidelines.
4.4 CoEx Cleaning Tablets – CoEx Brewer Units
Crane Merchandising Systems recommends that the correct cleaning tablets are used for
cleaning the CoEx brewer. The product must be used in accordance with the manufacturer’s
instructions following all health and safety guidelines.
To Next Page
Loading...
