Section 2 – Installation
Important! It is essential that any other personnel
responsible for installing and servicing your machine
understand the following:
1. The installation and commissioning of your machine
should only be carried out by a trained and authorised
service engineer.
2. All water and electrical services must be correctly and
safely connected in compliance with national and local
regulations.
3. All covers must be replaced securely and the machine
left in a safe condition.
2.1 Siting your Machine
1. Your machine is suitable for indoor use only. We
recommend that it be situated in an area with an
ambient temperature not below 10º C and not
exceeding 30º C. Your machine should be located near
services as detailed in section 1.
2. It must also not be sited in an area where a water jet
could be used.
3. Prior to placing your machine in its final location,
ensure that there is sufficient access space available
via passageways, stairs, lifts, etc.