10
4. Open the file in turn → select the file.
依次打开文件→选择文件。
5.Generate G-code, and save the gcode file to
storage card.
生成G代码→保存到存储卡。
File names must be Latin letters or numbers, not Chinese
characters or other special symbols.
文件名需为拉丁字母或数字，不能为汉字或其他特殊符号。
Notes: For details on the software instructions, please refer
to the slicing software manual in the storage card!
温馨提示：软件使用说明详情，请见存储卡内切片软件使用手册！
6.Insert the storage card→ print from
card→select the file to be printed.
插入存储卡→从存储卡上打印→选择要
打印的文件。
17
To Next Page
Loading...
