Creality 3dpRINTmILL - Install the Profile Support Frame

Install the Profile Support Frame
1
安装型材支撑架
内六角平圆头螺钉M5X12
19
Hexagon socket flat round
head screw M5X12 x 4
Step: Install the profile support 1 and profile support 2 to the bottom of machine with four hexagon flat head screws
M5x12 (As shown in the figure above).
步骤：用4颗内六角平圆头螺钉M5X12将型材支撑架1和型材支撑架2安装到底部组件上（如上图）。
Profile bracket 1 x 1
型材支架1
6
Profile bracket 2 x 1
型材支架2
7
Bottom belt assembly x 1
底部皮带组件
2
6
6
19
19
7
2