Creality Ender 3 Pro - Page 13

Creality Ender 3 Pro Assembly Instructions V1.0 13 www.rb42.blog
2.2
Mount the (03) power supply to the reverse side of (16) Z-
axis vertical profile right (from step 1.4), the power supply is
held in place with 2x M4x20 hex socket cap screw which are
inserted from the front face of the Z axis profile using a M3
hex key (Allen key).
2.3
Attach the (01) LCD display to the front face of (02) printer
base on the right-hand side with 2x M5x8 hex socket button
head screws using an M3 hex key (Allen key) to screw
securely in place.