Creality Ender 3 Pro - Page 19

Creality Ender 3 Pro Assembly Instructions V1.0 19 www.rb42.blog
Step 6 - X-axis Synchronous Belt
Parts for this
step
1x (14) Synchronous Belt (77cm)
Process
6.1
Feed the (14) Synchronous Belt (77cm) under the plastic cover
and around the X-axis pulley (GT2, 20 teeth). The easiest way
to wrap the belt around the pulley is to feed the belt through
the cover, going in one side and out the other, then bending
the belt around and feeding back through the cover once
again.