Creality Ender 3 Pro - Page 25

Creality Ender 3 Pro Assembly Instructions V1.0 25 www.rb42.blog
Step 9 - Installing of X-axis gantry onto the Z-axis vertical uprights.
Tools for this
step
M2.5 Hex Key (Allen Key)
Parts for this
step
X-axis gantry assembly, comprising of:
• 1x (04) Z-axis passive block
• 1x (05) Extruder carriage
• 1x (06) XE stepper motor kit
• 1x (07) X-axis idler pulley
• 1x (14) Synchronous Belt (77cm)
• 1x (18) X-axis profile (2020)
Printer base assembly, comprising of:
• 1x (02) Printer Base
• 1x (08) Z-axis motor assembly
• 1x (15) Z axis profile left (2040)
• 1x (16) Z axis profile right (2040)
• 1x (17) Z-axis lead screw (T-type, T8xM8 370mm)
Process
9.1
Place the assembled X-axis gantry over the tops of the Z-axis
vertical uprights, ensuring the V-slot wheels are lined up
with the channels on the vertical profiles and sitting true and
correctly within the slot.