Creality Ender-3 Instructions For Assembly

◆ This guide is for the Ender-3 3D printer.
◆ Select the correct input voltage to match
your local mains (220V or 110V).
◆ Because of software/hardware upgrades
and model differences, new revisions
may not be listed in this guide.
◆ Detailed instructions for use are
available on the SD card.
Ender-3 3D Printer
Instructions for assembly

Creality Ender-3 Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Nozzle Temperature	255°C
Max Bed Temperature	110°C
Connectivity	SD card, USB
Supported Materials	PLA, ABS, TPU, PETG
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Machine Dimensions	440 x 410 x 465 mm
Display	LCD
Bed Leveling	Manual
Print Speed	180 mm/s
Power Supply	24V