9. Using the TWAIN Interface
Please refer to section 7 TWAIN Installation for TWAIN installation instructions.
If the Twain interface (SFT-10012) is installed the camera can be used with any TWAIN Compliant
Application.
The TWAIN interface will attach itself to the first Credential Cam Pro camera it finds connected to the
computer. For best operation, run the TWAIN Interface on a system that has only one Credential Cam Pro
camera installed.
Any application that supports a TWAIN Data Source as a capture device can access the camera. The
camera's image will appear as shown below:
To Next Page
Loading...