32
Instrument reset.
(im. 13)
To reset the instrument, press the button up
to the SYSTEM mode, then press and hold to
enter the mode. “s.unit” (set units) is displayed
with the indication °C/m. or °F/ft. Press again.
“S.RESET_NO” (system reset) is displayed.
Press and hold. The indication NO flashes.
Press. YES is displayed. Press and hold.
“SURE?_NO”. is displayed. Press. “YES” is dis-
played. Press and hold. Wait for a sound signal.
Dots and the writing “DONE!” are displayed.
The instrument is reset. Then it automatically
returns to the main screen.
By resetting the instrument, all the computati-
ons related to the current de-saturation are
reset.
DANGER: Do not reset your instru-
ment if it has to be used to compute
subsequent dives!
To Next Page
Loading...
