36
WHILE DIVING
COMPUTER FUNCTIONS
(im. 14-15)
The computer can be set with three dif-
ferent functions:
1) DIVE AIR if dives are performed with air
and you want to use a decompression com-
putation.
2) DIVE NITROX if dives are performed
with Nitrox and you want to use a decom-
pression computation..
3) GAGE if you do not want to use a de-
compression computation.
NOTE: The Leonardo computer is factory
set on the DIVE AIR program, with the mix-
ture’s O2 value on 21% and PO2 on 1.4.
FO2 values different from Air 21% activate
the computation program Dive Nitrox.
DIVING WITHIN NO DECOMPRES-
SION LIMITS
DIVE AIR function: Dive with air.
(im. 14)
The Leonardo computer automatically starts
the DIVE AIR program at a depth exceeding
3.93 ft.. During a dive within the no decom-
pression limits, the display will show the follo-
wing information:
1) Current depth value (Depth m.).
2) Non decompression time (No Deco min.).
3) Max depth reached (Max m.).
4) Elapsed dive time (Dive.T min.).
5) Ascent rate indicator.
6) Indicator of altitude level (if set)
7) Current temperature, expressed in °C or °F.
To Next Page
Loading...
