EasyManua.ls Logo

Cressi Computer Leonardo - Gage Function (Depth Gauge;Timer)

Cressi Computer Leonardo
432 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
will be Logbook and History. Later, in the PRE
DIVE screen the “STOP” icon, the DECO wri-
ting and the stop icon with the up arrow flash.
This means that the decompression stage has
been omitted during the last dive. The LOG
BOOK will store the same warning, indicating
that in a specific date the dive with a specific
number has been carried out without the de-
compression stage.
DANGER: Should this happen, you
must not dive for the next 48 hours. In
the event that you feel any symptoms of de-
compression sickness, you should contact the
DAN (Divers Alert Network) and your local
hyperbaric chamber centre, providing as
much data as possible about the dive.
GAGE FUNCTION
(depth gauge/timer).
(im. 24)
The Leonardo computer is equipped with a
third dive computing program (GAGE). This
function is especially useful for technical dives,
yet it is useful as well for apnea (free diving).
When the Gage function is enabled, Leonardo
does not perform any saturation and de-satu-
ration computation. It only operates as a basic
instrument indicating dive depth and time, as
well as some accessory data. In this condition,
proper decompression software must be utili-
zed according to proper dive tables. Cressi re-
minds you that sport dives must be carried out
within the no decompression guidelines, and at
the maximum depth of 132 ft., which is the
limit of sport diving: to exceed such limits dra-
matically increases the risk of decompression
sickness!
52
LEONARDO LIBRETTO 105X80 INGLESE:Layout 1 7-06-2011 10:11 Pagina 52

Table of Contents

Related product manuals