Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System
FPPASSWORD
Description: The front panel password is set with this command.
Help Menu(s): Main, System
Syntax: FPPWASSWORD password
Parameters: password - four digit numerical string using digits 1 through 6.
Possible Source: RS-232, CTP, Telnet
FREE
Description: This command displays the space remaining in the file system.
Help Menu(s): File
Syntax: FREE
Parameters: none
Possible Source: RS-232, CTP, Telnet
HEAPFREE
Description: This command displays the space remaining in the memory heap.
Help Menu(s): File
Syntax: HEAPfree
Parameters: none
Possible Source: RS-232, CTP, Telnet
HELP
Description: This command lists the commands for the console grouped by function.
Help Menu(s): Main
Syntax: HELP [ALL | DEVice | ETHERnet | FILE | SYStem]
Parameters: ALL - shows all the commands for the touchpanel
DEVice - displays commands specific to a touchpanel device
ETHERnet - shows the commands for Ethernet control
FILE - displays the commands for the file system
SYStem - list of general system commands
Possible Source: RS-232, CTP, Telnet
INFO
Description: This command prints the various capabilities of the firmware.
Help Menu(s): Main, System
Syntax: INFO
Parameters: none
Possible Source: RS-232, CTP, Telnet
INITIALIZE
Description: This command erases the entire flash file system. Progress status messages appear until the command has
completed.
Help Menu(s): File
Syntax: INITIALIZE
Parameters: none
Possible Source: RS-232, CTP, Telnet
Operations Guide - DOC. 5957 Integrated Dual Bus Control System: PRO2 & AV2 • 51
To Next Page
Loading...
