Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System
TIMEDATE
Description: This command sets the time and date of the control system real-time clock. If no parameter is entered, the
current time/date is displayed.
Help Menu(s): Main, System
Syntax: TIMEdate [hh:mm:ss mm/dd/yyyy]
Parameters: hh:mm:ss - time in hours (use 24 hour), minutes, and seconds
mm/dd/yyyy - date in months (1 through 12), day (1 through 31), and year
Possible Source: RS-232, CTP, Telnet
TYPE
Description: This command displays the contents of a file (only works for files under 1024 bytes in size).
Help Menu(s): File
Syntax: TYPE filename
Parameters: filename - name of the file to be displayed
Possible Source: RS-232, CTP, Telnet
UPLOAD
Description: This command will load a file into a Cresnet touchpanel device.
Help Menu(s): System
Syntax: UPLOAD [DISPLAY | FIRMWARE] net_id
Parameters: DISPLAY - indicates that the file is a display list for a touchpanel
FIRMWARE - indicates that the file is a firmware upgrade
net_id - Cresnet ID of the touchpanel device (in hexadecimal)
Possible Source: RS-232, CTP, Telnet
VERSION
Description: This command displays firmware version information.
Help Menu(s): Main, System
Syntax: VERsion
Parameters: none
Possible Source: RS-232, CTP, Telnet
WEBSERVER
Description: This command enables/disables the webserver for the control system. System must be rebooted to take affect.
Help Menu(s): Ethernet, System
Syntax: WEBSERVer [ON | OFF]
Parameters: ON - enables webserver
OFF - disables webserver
Possible Source: RS-232, CTP, Telnet
WEBINIT
Description: This command sets the main page for the web pages. It looks for a special file, which contains the name of the
default page.
Help Menu(s): Ethernet, System
Syntax: WEBINIT
Parameters: none
Possible Source: RS-232, CTP, Telnet
Operations Guide - DOC. 5957 Integrated Dual Bus Control System: PRO2 & AV2 • 55
To Next Page
Loading...
