Crestron CHV-TSTATEX User Manual

infiNET EX™ Thermostat Crestron CHV-TSTATEX
C2Net Device, Slot 8
2. If additional CHV-TSTATEX devices are to be added, repeat step 1b for each
device. Each CHV-TSTATEX is assigned a different RF ID number as it is
added.
3. If necessary, double click a device to open the “Device Settings” window and
change the RF ID, as shown in the following illustration.
“Device Settings: Crestron CHV-TSTATEX” Window
NOTE: The ID code specified in the SIMPL Windows program must match the
RF ID of each unit. Refer to “Identity Code” on page 8.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (
F1).
30 • infiNET EX™ Thermostat: CHV-TSTATEX Operations & Installation Guide – DOC. 6989A

Crestron CHV-TSTATEX Specifications

General

Brand	Crestron
Model	CHV-TSTATEX
Category	Thermostat
Language	English