Crestron CHV-TSTATEX - SIMPL Windows Programming

Crestron CHV-TSTATEX infiNET EX™ Thermostat
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the CHV-TSTATEX, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”:
Configuration and Program.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
1. To incorporate the CHV-TSTATEX into the system:
a. Drag the CEN-RFGW-EX (gateway) from the Wireless Receivers |
Wireless Receivers (RF) folder of the Device Library and drop it in the
System Views.
Locating the CEN-RFGW-EX in the Device Library
b. Drag the CHV-TSTATEX from the Wireless Remotes | Wireless
Remotes (RF) folder of the Device Library and drop it on the
CEN-RFGW-EX.
Locating the CHV-TSTATEX in the Device Library
NOTE: If connecting to the MC3, drag the CHV-TSTATEX directly to the
control system.
The system tree of the control system displays the CHV-TSTATEX in the
appropriate slot(s) with a default RF ID as shown in the following
illustration.
Operations & Installation Guide – DOC. 6989A infiNET EX™ Thermostat: CHV-TSTATEX • 29