infiNET EX™ Thermostat Crestron CHV-TSTATEX
Heat/Cool Thermostat
The CHV-TSTATEX is designed for heating and cooling control of baseboard,
forced air, heat pump and dual-fuel heat pump HVAC systems. The large backlit
LCD display provides a clear view of current temperature, setpoint, system mode,
fan mode, system status and setup functions. Climate-control features include
separate heat and cool setpoints and adjustable anticipators to prevent overshooting
the desired temperature. Continuous fan operation can be selected when needed for
increased circulation.
infiNET EX Communications
Built on steadfast infiNET technology, infiNET EX is the new standard in 2-way
wireless connectivity that can handle installations in even the most urban settings.
The redundant nature of its mesh networking technology means that a command will
never be missed, resulting in faultless operation - something that is of the utmost
importance when it comes to HVAC control and home automation. The
CHV-TSTATEX harnesses this cutting edge wireless connectivity which affords it a
level of robustness and dependability above other solutions.
Automation System Integration
The wireless connection to the control system allows the functions of the
CHV-TSTATEX to be controlled from touch screens, keypads, wireless remotes,
computers, or even a mobile device. It supports unlimited flexibility for remote
control, scheduling, and integration with other devices and systems. However, in the
event that communication with the control system is disrupted for any reason, the
CHV-TSTATEX will remain operable to control the HVAC system.
Easy Installation
System design and installation using infiNET EX thermostats could not be easier.
Because no control wires are required, the CHV-TSTATEX can be installed just like
any conventional thermostat.
To simplify installation, physical switches are provided for the most critical
configuration options, including heat/cool type, heat pump behavior, power settings,
number of heating/cooling stages, and fan options. These settings allow HVAC
contractors to install and test the thermostats prior to the appearance of a Crestron
system integrator.
An infiNET EX gateway such as the CEN-RFGW-EX is needed for
communications. Setting the ID of each device employs the same convention as
Crestron's familiar TSID method, and each device is programmable using Crestron
SIMPL Windows, SystemBuilder™ or D3Pro
®
software just like any wired Cresnet
®
device. Even firmware updates are performed over the wireless network.
2 • infiNET EX™ Thermostat: CHV-TSTATEX Operations & Installation Guide – DOC. 6989A
To Next Page
Loading...
Need help?
General
