Crestron CI-KNX User Manual

Crestron CI-KNX KNX Control Interface
Operations & Installation Guide – DOC. 0008 KNX Control Interface: Crestron CI-KNX

1
 DIN-rail mountable
 Control up to 250 Objects on a KNX network
 Equipped with a TCP/IP port
 Capable of using Power Over Ethernet
 Capable of sending live updates. No polling necessary
 Capable of addressing and controlling separate KNX objects
KNX Control Interface: CI-KNX
Introduction
The Crestron CI-KNX is a control interface by which a Crestron control system can
be coupled to a KNX (previously known as KNX) installation using Ethernet
(TCP/IP). Also, the Crestron CI-KNX filters the desired information out of received
KNX messages and sends them to the Crestron control system via the TCP/IP
interface, which provides the Crestron installation with live updates of the KNX
installation.
The Crestron CI-KNX offers functionality to program separate KNX objects. This
results in a new and flexible method for programming your KNX system.
Features and Functions
Specifications
Specifications for the Crestron CI-KNX are listed in the following table.
Crestron CI-KNX Specifications
SPECIFICATION
DETAILS
Power
Power Usage
External power supply 12-24V AC or 12-30V
DC
Alternative: 'Power-over-Ethernet'
Power consumption: < 800 mW
Minimum 2-Series Control
Version 2 or later

Crestron CI-KNX Specifications

General

Brand	Crestron
Model	CI-KNX
Category	Recording Equipment
Language	English