Crestron DM-MD8X8 - Page 159

Crestron DM-MD8X8/16X16/32X32 DigitalMedia™ Switchers
EDID Information
EDID Information
Manufacturer: SHP
Name: SHARP HDMI
Timing: 1920x1080 @ 60Hz
ii. Press the MENU button to return to the Loopback Settings.
3. Press the MENU button to return to the list of options for the input card.
Restore Defaults
Use the Restore Defaults function to reset the card to its factory settings. The card’s
factory settings are:
x Input Select: Input 1
x Rotate Rate: 3 seconds
x Image Display (Full or Quad): Full
x Image Format: NTSC
x Image Cycle (Enable/Disable): Disabled
x Text Overscan: 5
x Loopback Allow Deep Color: On
x Color Space Mode: Force RGB
x Enable/Disable for inputs 1-4: All inputs enabled
x Text Color for inputs 1-4: White
x Text Box Color for inputs 1-4: Black
x Text Position for inputs 1-4: Top Left
x Brightness level for inputs 1-4: 0
x Contrast level for inputs 1-4: 0
x Saturation level for inputs 1-4: 0
x Hue level for inputs 1-4: 0
x Input Names for inputs 1-4: Camera 1- Camera 4
To restore the card’s default settings:
1. Turn the selection knob to highlight Restore Defaults and press the
ENTER button.
2. Press the soft button labeled Yes to restore the default setting or press the
soft button labeled No to cancel and return to the list of options for the input
card.
Operations Guide – DOC. 6755C DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 x 153