Crestron DM-MD8X8 - Appendix C: Output Configuration; Selecting and Renaming DM Outputs

DigitalMedia™ Switchers Crestron DM-MD8X8/16X16/32X32
Loopback Settings
The DMC-VID-BNC can display information about the device connected to the
HDMI OUT port as well as information about the signal passed to the HDMI OUT
port on the DMC-VID-BNC. Available information includes deep color setting,
audio details and EDID information. To view the loopback settings:
1. Turn the selection knob to highlight Loopback Settings and press the
ENTER button.
Loopback Settings
Loopback Settings
Allow Deep Color: On
Deep Color Mode: Off
Audio
2. Turn the selection knob to view available information, enable/disable deep
color, view audio details, or view EDID information.
a. The loopback output can be set to enable or disable the deep color
feature of the carried video signal. To enable or disable deep color:
i. Turn the selection knob to highlight Allow Deep Color and press the
ENTER button.
Allow Deep Color Mode
Allow Deep Color Mode
* Off
On
ii. The current selection is indicated with an asterisk (*). Turn the
selection knob to highlight Off or On and press the ENTER button.
b. To view audio details:
i. Turn the selection knob to highlight Audio and press the ENTER
button.
158 x
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755C