DigitalMedia™ Switchers Crestron DM-MD8X8/16X16/32X32
b. The current selection is indicated with an asterisk (*). Turn the
selection knob to highlight Off or On and press the ENTER
button.
x Audio Output Level:
a. Turn the selection knob to highlight Audio Output Level and
press the ENTER button.
Audio Output Level
Audio Output Level
-52 dB
b. Turn the selection knob to adjust the audio output level.
c. Press the MENU button to return to the list of options for the
output card.
3. To exit and return to the list of available functions, press the MENU button.
Fiber Output Information
(DM Fiber-Equipped Outputs)
Cards equipped with DM fiber outputs can provide information on the HDCP state,
the deep color setting, the audio signal that is being passed through, and EDID. To
view information on the fiber output:
1. Open the Outputs section and select an output as described on page 175.
2. Turn the selection knob to highlight Fiber Output Settings and press the
ENTER button. A list of available data will be displayed. Some categories
such as Audio and EDID Device Information will display detailed
information when highlighted with the selection knob and selected by
pressing the ENTER button. Allow Deep Color can be used to determine
whether deep color can be sent over the output. To enable or disable deep
color:
a. Turn the selection knob to highlight Allow Deep Color and press the
ENTER button.
178 x
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755C
To Next Page
Loading...
