Connect to the Cloud
The XiOCloud®service allows supported devices across an enterprise to
be managed and configured from one central and secure location in the
cloud. Supported Crestron® devices are configured to connect to the
service out of the box.
Use of the service requires a registered XiOCloud account. To register
for an XiOCloud account, refer to
www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-
Registration-Room-Licenses.
To connect the device to the XiOCloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or the device. The MAC address and serial number are
required to add the device to the XiOCloud service.
NOTE:If the device has multiple MAC addresses, use the MAC
address that is providing the primary connection back to the
network. For most devices, the Ethernet MAC address should be
used. However, if your device is connecting to the network over a
different protocol (such as Wi-Fi® communications), use the MAC
address for that protocol instead.
2. Log in to your XiOCloud account at portal.crestron.io.
3. Claim the device to the XiOCloud service as described in the
XiOCloudUserGuide.
Select the device from the cloud interface to view its status and
settings. The device may now also be managed and assigned to a group
or room. For more information, refer to the XiOCloudUserGuide.
NOTE:For XiOCloud accounts with room-based licenses, the device
must be added to a licensed room before its status and settings can
be viewed.
Observe the LED Indicators
Refer to the following table for information about the LED indicators on
the device.
LED Indicator Color Meaning
PWR Amber Power is being applied to the
device. Thedevice is booting.
Green Power is being applied to the
device. Thedevice is
operational.
SETUP Red The SETUP button is pressed.
NV Green (DM-NVX-E30 only) The
device is encoding
(transmitting) network video.
(DM-NVX-D30 only) The
device is decoding (receiving)
network video.
OL Green The device is online with a
control system via Ethernet.
Ethernet Green An Ethernet link is
established.
Flashing amber Data activity is occurring on
the Ethernet link.
HDMI INPUT
(DM-NVX-E30 only)
Green An HDMI signal is detected at
the HDMI input.
HDMI OUTPUT
(DM-NVX-D30 only)
Green An HDMI signal is being
transmitted at the HDMI
output.
6
DM-NVX-E30 and DM-NVX-D30
QuickStart
DM NVX® 4K60 4:4:4 HDR Network AV Encoder and Decoder