Crestron DM NVX Series Design Guide

10 • DM NVX System Design Guide – DOC. 7977F
DM NVX Endpoints (Continued)
FEATURE DM-NVX-350 DM-NVX-350C DM-NVX-351 DM-NVX-351C DM-NVX-352 DM-NVX-352C DM-NVX-E30 DM-NVX-E30C DM-NVX-D30 DM-NVX-D30C
Other
Firmware Upgrade
Capability
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Restore Default
Settings Capability
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Reboot Capability Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Simple Network
Time Protocol
(SNTP)
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
1. A DVI or Dual-Mode DisplayPort™ interface is supported via an HDMI input using a suitable adapter or interface cable. (CBL-HD-DVI interface cables are available separately.)
2. This feature is supported in Receiver mode only.
3. A DVI interface is supported via the HDMI output using a suitable adapter or interface cable. (CBL-HD-DVI
interface cables are available separately.)
4. QuickSwitch HD technology applies only when switching occurs between sources that have the same resolution and HDCP value.
5. Secondary audio can only be streamed to DM NVX devices. Only one HDMI input can be selected at a time. If HDMI 1 is used for primary AV, HDMI 2 cannot be used for secondary audio.
6. Only one HDMI input can be selected as the Dante or AES67 transmit audio source. If the primary stream is HDMI 1
,
Dante audio can only transmit HDMI 1 or insert audio. HDMI 2 cannot be used as
the Dante or AES67 transmit audio source.
7. This feature is supported in Transmitter mode only.

Crestron DM NVX Series Specifications

General

Latency	<1 Frame
Dimensions	Varies by model
Weight	Varies by model
Video Input	HDMI
Video Output	HDMI
Audio Formats	PCM, Dolby Digital, DTS
Audio Inputs	HDMI, Analog
Audio Outputs	HDMI, Analog
Control	Crestron Control System
HDCP	HDCP 2.2
Security	AES encryption