Crestron GLS-ODT-C-CN - GLS-ODT-C-NS Specifications; Product Specifications

6 • GLS-ODT-C-CN and GLS-ODT-C-NS Product Manual — Doc. 9341A
GLS-ODT-C-NS Specifications
Product specifications for the GLS-ODT-C-NS.
Product Specifications
Sensing
Motion Detection
Technology
Passive infrared (PIR) motion detection;
Ultrasonic (US) (40kHz)
Coverage Area 2,000 sq ft
Coverage Pattern 360°
LED Indicators
PIR (1) Red LED;
Lights to indicate PIR detection
Ultrasonic (1) Green LED;
Lights to indicate ultrasonic detection
IR Remote (Sold Separately)
Parameters and Settings Available Via IR Remote:
Separate occupancy and vacancy sensitivity settings
(1) Pushbutton located behind the front cover for testing the unit
Timeout (30s, 2m, 5m, 10m, 15m, 30m)
Walk-Through mode “Short Timeout” (Enable/Disable)
LEDs (Enable/Disable)
PIR sensitivity (High, Med, Low, OFF), with the option to set separate occupancy and vacancy settings
US sensitivity (High, Med, Low, OFF), with the option to set separate occupancy and vacancy settings
US detection (Side A only, Side B only, Both)
ID of sensor
Factory Reset
Force Vacancy
(4) Custom buttons for future additional features