Crestron TPMC-8X-GA - Defaults for Embedded Windows Applications; Programming Embedded Windows Applications

Crestron TPMC-8X-GA Isys
®
8.4” WiFi Touch Screen
Right-click on any of the applications in the Project View and select Properties to
open the “Embedded Application Property” window (refer to the illustration below).
This window permits a choice of positions on the screen, assignment of an analog
touch join type and number and a show/hide join number.
Defaults for Embedded Windows Applications
Use the Default Path text box in the “Embedded Applications Properties” window to
enter the default document for the application.
Edit the Default Position and Size in the “Embedded Application Properties”
window to point to your new location.
Sample of an “Embedded Application Properties” Window
Programming Embedded Windows Applications
The following diagram is an example of a basic SIMPL program that enables you to
open/close an embedded application. The example program is discussed following
the diagram.
Operations Guide – DOC. 7078C Isys
®
8.4” WiFi Touch Screen: TPMC-8X-GA • 45