Crestron TPS-6X Series - IR Wireless, Wired Communications, Battery, and Environmental Specs

Isys™ 5.7” Wireless Touchpanels Crestron TPS-6X Series
TPS-6X Specifications (Continued)
SPECIFICATION DETAILS
IR Wireless
1
IR Transmitter 38 kHz, RC5 format
Range 50 feet (15 meters) typical
Gateway
Requires a C2N-IRGW IR Gateway or
CNXRMIRD IR Receiver
(both sold separately)
Wired Communications
2
Ethernet
10BASE-T/100BASE-TX, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, TCP/IP, UDP/IP, CIP, DHCP
Cresnet Supports Cresnet slave mode
Video
2
Signal Types Composite
Formats NTSC 480i or PAL 576i
Color Depth 18-bit, 262,144 colors
Windowing
Single window, deinterlaced and scalable up
to full screen
Audio Internal transducer for key click sound
Battery
Internal Battery
NiMH, 4.8 Volt, 2000 mAh,
model TPS-6X-BTP (included)
Usage Per Charge
~2 hours continuous, 2 days under normal
use with factory settings
Charging Time
3
~2.5 hours (~2.5 to 3 hours when in use)
Power Requirements
4
Power Pack
0.75 Amps @ 24 Volts DC,
100-240 Volts AC
50/60 Hz power pack included
Cresnet Power Usage
18 Watts (0.75 Amps @ 24 Volts DC)
TPS-6X-IMCW module included
Default Net ID 03
Minimum 2-Series Control
System Update File
5, 6, 7
Version 3.155.1240 or later
Environmental
Temperature
32º to 112ºF (0º to 45ºC)
50º to 104ºF (10º to 40ºC) while charging
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 61 BTU/Hr
(Continued on following page)
6 • Isys™ 5.7” Wireless Touchpanels: TPS-6X Series Operations Guide – DOC. 6875B