Crestron TPS-6X Series User Manual

Isys™ 5.7” Wireless Touchpanels Crestron TPS-6X Series
CRESNET
Touch CRESNET to enter the CRESNET SETUP menu.
CRESNET SETUP Menu
The CRENSET SETUP menu has – and + controls to set the Cresnet ID and a
Connection Status indicator to show when the Cresnet connection is active.
Touch RETURN to go back to the main COMMUNICATIONS menu. After
communications parameters have been set, touch RETURN to go back to the
SETUP MODE menu or MAIN MENU.
TOUCH PANEL
From the SETUP MODE menu, touch the TOUCH PANEL button to enter the
TOUCHPANEL menu.
TOUCHPANEL Menu
The TOUCHPANEL menu offers access to BACKLIGHT SETUP and GRAPHICS
SETUP menus as well as a series of – and + controls to set the Power Timeout (when
the touchpanel is undocked), Button Backlight Timeout and Standby Timeout.
Buttons are also provided to enable/disable Power up on last page, which will cause
the touchpanel to boot up to the last page it was on before shut down, System
32 • Isys™ 5.7” Wireless Touchpanels: TPS-6X Series Operations Guide – DOC. 6875B

Crestron TPS-6X Series Specifications

General

Brand	Crestron
Model	TPS-6X Series
Category	Touch Panel
Language	English