EasyManuals Logo

Crestron UC-SB1-CAM Getting Started

Crestron UC-SB1-CAM
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Mount on a Wall
The soundbar includes anchors that are suitable for mounting it on sheetrock walls up to 1/2 in. (13 mm) thickness. Masonry and other materials may
require additional installer-supplied mounting hardware.
NOTES:
l For optimal viewing results, the soundbar should be mounted in a location that places the camera approximately 12 in. (305 mm) above the plane of
the rooms conference table.
l When mounting on a wall beneath a display device, leave 3/4 in. (19 mm) (minimum) clearance above the top of the soundbar. Use the included
template to allow for sufficient clearance between the soundbar and display device.
The following tools are required to mount the soundbar:
l Drywall saw (not included)
l Drill with 5/16 in. bit (not included)
A template is included to provide drill hole locations for the included mounting hardware.
1. Attach the template to the desired mounting location with the template's center reference line at the center of the desired location.
NOTE:Use the center reference hole of the template as a guide to attach the template.
3
UC-SB1-CAM
QuickStart
UC Video Conference Smart Soundbar & Camera

Other manuals for Crestron UC-SB1-CAM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crestron UC-SB1-CAM and is the answer not in the manual?

Crestron UC-SB1-CAM Specifications

General IconGeneral
Microphone frequency response20 - 8000 Hz
Megapixel12 MP
Sensor typeCMOS
Gain control typeAuto
Optical sensor size1/2.3 \
Aperture range (F-F)2.8 - 2.8
Horizontal field of view120 °
Product colorBlack
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity1
Maximum frame rate30 fps
Supported video modes1080p
Maximum video resolution1920 x 1080 pixels
USB cable length1.83 m
Power source typeAC
Power consumption (typical)22 W
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 90 %
CertificationCE, IC, UL 62368‑1, CSA C22.2 62368‑1, EN 62368‑1, IEC 62368‑1, FCC Part 15 Class B, ICES‑003 Issue 5 Class B, EN55022:2010 Class B, AS/NZS CISPR22:2010 Class B, AS/NZS CISPR 22:2010 Class B, EN55024:2010, EN61000‑3‑2:2014, EN61000‑3‑3:2013, RoHS compliant
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width1108 mm
Height117 mm
Weight6800 g

Related product manuals