Spinna Winna Operators Manual Part No. 990xxx Issue 1
Page 7 of 31
8
If your machine is NOT fitted with a
validated coin entry (CDS Mk4) go to step
9 otherwise on each section, open the
hinged CDS doors and remove the CDS
cover to gain access to the validators (refer
to section 5.9 on page 23) and prime each
validator with a coin of play.
For more details on the CDS unit see the
separate manual supplied.
PRIMING THE VALIDATORS (IF FITTED)
7
Fit halogen lamps x2 per section. Push-
fit the bulbs into the socket on each
window support bracket as shown
Halogen lamps are supplied unfitted for
safety reasons and can be found in the RHS
section cashbox. Use only the specified
type IE. 24v-20w
INSTALLING THE HALOGEN LAMPS
WARNING
6 Ensuring that the mains electrical supply
is earthed and complies with the
specification on the supply voltage label,
Connect the machine to a supply voltage
ELECTRICAL CONNECTION
Take care when handling supply voltage
parts as miss-handling could lead to
electrical shock.
WARNING
To Next Page
Loading...