V. Fixing Accessories
Belt clip
Tetra 3 has a strong alligator clip located on the back of the unit. Lifting the
small lever will allow the unit to be attached to a belt more easily.
Universal harness plate
Crowcon provide a universal harness plate which can be used with either a
chest harness or a shoulder strap.
How to wear your Tetra 3 unit
Chest harness
Use the M3 fixing on the back
of your Tetra 3 unit to attach
the chest harness plate.
Create a chest harness by
attaching one strap to the top
connectors, to go around the
neck, and the other to link
around the waist using the
side connectors. Adjust the
lengths until the Tetra 3 unit is
in a comfortable working
position.
Shoulder strap
With the universal harness plate in place, attach the shoulder strap accessory
onto the top connectors. Adjust to a comfortable working position.
See accessories, section XI, for full list.
14
Fixing Accessories Tetra 3
To Next Page
Loading...
Need help?
General
