Crown DCi 8 - DCi Series Performance Specifications; Detailed Performance Metrics and Electrical Characteristics

DriveCore Install Network Display Series Power Amplifiers
Operation Manual
page 44
8|600ND 4|1250ND
Frequency Response (8 Ohms, 20 Hz - 20kHz) ±0.25 dB
AVB Signal to Noise Ration (ref. rated Power,
8Ohm, 20 Hz - 20kHz
>108 dB
Signal to Noise Ration (ref. rated Power, 8Ohm,
20 Hz - 20kHz
>104 dB
Total Harmonic Distortion (at full rated power,
20Hz - 20kHz)
0.35%
Intermodulation Distortion (60Hz and 7kHz at
4:1, from -30dB to full rated power)
≤0.35%
Damping Factor (20 Hz to 100 Hz) >1000 >1500
Crosstalk (below rated power, 20 Hz to 1 kHz) >70 dB
DC Output Offset (with inputs shorted) ±10mV
Input Impedance (nominal balanced,
unbalanced)
10 kOhms, 5 kOhms
Required AC Mains (±10%) 100V - 240V~ 50/60Hz
Cooling Continuously variable speed forced air, front-to-back airflow
Load Impedance Stereo/Dual Mode 2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4 - 16 Ohms; 140Vrms and 200Vrms
Maximum Fan Noise (re dB SPL @ 1M) 47 47
Weight 30 lbs (13.60kg) 30 lbs (13.60kg)
IEC Power Connector 20A IEC 20A IEC
Performance Specifications
DCi Specications