CoCo-80 Quick Reference
10
Figure 6: CI Technical Support Site License Key
download link
USB Device Driver
After the EDM installation finishes, the CoCo can be
connected to the PC. To connect via a USB cable the USB
driver must first be installed. The driver does not install
automatically.
To install it manually, connect CoCo to the PC with the
provided USB cable and power the CoCo on. This cable
has a mini-USB connection to the CoCo and a standard
USB 1.1/2.0 connection to the PC.
Open the Control Panel from the Start Menu. Open the
Device Manager from the Control Panel to view all
connected devices.
To Next Page
Loading...
