CoCo-80 Quick Reference
33
updates to add Machine3 and saves a new Route as
Route3, which is added to the list of available Routes in
the Factory1 database.
Synchronize via USB
Turn on the CoCo and enter VDC mode, then connect the
CoCo via USB or Ethernet and click the Download button
in the EDM Devices Toolbar to start the Vibration Data
Collector Synchronization Wizard.
Verify that CoCo Device is selected and press Next.
Figure 32: VDC Synchronization Wizard
Select the CoCo that contains the data to be downloaded
and press Connect. Once the connection is established,
press Next to select the data sets to be downloaded.
To Next Page
Loading...
