CoCo-80 Quick Reference
27
Figure 28: Measurement Entry Wizard, Name and
Description dialog
When the wizard is completed the dialog closes and the
Entry is complete. Repeat this process for all Entries
associated with each Point in the database. Note that this
process is only done once when the database structure is
initially setup. However, it can be modified at any time.
Only one Machine of each type needs to be created
within a Factory. Once it has been defined the Machine,
Points, Entries and notes for a machine type can be
duplicated and renamed to populate the database. Not
only does this make Factory setup quicker, it also helps to
insure that all measurement Entries are identical for each
Machine of one type so they can be compared to each
ot her.
Entries can also be copied from one measurement Point
to another. Do this by right-clicking on the entry and
selecting Copy Entry from the popup menu, then select
another measurement Point, right-click on it and select
Paste Entry. Additionally, Duplicate Entry can be selected
from the popup menu to create a copy of the Entry and
then change any necessary parameters for the new Entry.
These tools help to quickly add as many Entries to the
Database as needed.
To Next Page
Loading...
