CoCo-80 Quick Reference
49
Figure 50: CoCo Setup menu
Tacho/RPM: Change the default RPM entry mode.
The options are to Apply the user expected RPM
value set by PC, Prompt to let user manually input
the value, or Read from the tachometer
measurement.
Memory:
Displays the status of onboard and SD
memory. It includes values for Used Space, Free
Space, % Used, and Total Space.
Date/Time:
Sets the date and time for the CoCo.
This is important to set as Time and Date data are
included as attributes to any data collected.
Connections:
Displays the status of the Ethernet
and USB connections. The IP settings can also be
configured here. Check this menu if there are
problems connecting to a network to upload data
or update the CoCo software.
Storage Card:
Accesses the data stored on the SD
card.
Power: Displays the current battery level, whether
running on the battery or power adapter, and
total time the unit has been run on battery po we r.
To Next Page
Loading...
